|
Product Details:
|
| Name: | Non Surgical Spinal Decompression Machine | Applicable Symptoms: | Orthopedics |
|---|---|---|---|
| Material: | Magnesium Alloy & ABS Engineering Plastics | Voltage: | 220V/380V |
| Frequency: | 50Hz±1Hz | Accuracy Rate: | 90% |
| High Light: | Orthopedics Non Surgical Spinal Decompression Machine,Spondylosis Non Surgical Spinal Decompression Machine,Orthopedics decompression therapy machine |
||
Orthopedics Non Surgical Spinal Decompression Machine Cervical Spondylosis
Non Surgical Spinal Decompression Machine Advantages
1. High decompression
The monograph of China's "Intervertebral Disc Herniation" emphasizes that continuous pressure reduction must reach more than 25% of the body weight and act on the diseased intervertebral disc, which is a necessary core condition for continuous negative pressure. The spine positioning cycle decompression system can give the patient an external tension of more than 60% of the body weight, resulting in a continuous high negative pressure of -150 to 200mmhg, which provides conditions for the disc to infiltrate water, oxygen, and nutrients, which cannot be achieved by other devices.
2. Deep nourishment
Under the premise of imitating weightlessness, precise positioning, and high decompression, the intervertebral space can be easily opened to allow water, oxygen, and nutrients in the body to penetrate the intervertebral disc. Under the control of the computer, the intervertebral space is opened by 30% and then closed. And then open again, each open and close as a cycle, each treatment a total of 18 cycles, 28.2 minutes. This deep nourishment process also makes the protrusions go through the process.
3. Precise Repair
After the treatment of the first four parts, the paravertebral muscles are in a relaxed state. The application of cold compresses and intermediate frequency electrical interference not only retracts the relaxed muscles and restores their tension, but also better promotes blood circulation at the diseased site and reduces the cause. The inflammatory reaction caused by the pathological cause further consolidates the therapeutic effect of the alien capsule.
Non Surgical Spinal Decompression Machine Applicable symptoms
Cervical disc herniation
Cervical spondylosis
Sympathetic cervical spondylosis
Vertebral artery type cervical spondylosis, etc.
Main differences between alien capsule spinal decompression system and traditional traction
| Item | None-surgical Spinal Decompression System | Traditional Traction Bed |
| Design concept | Besides pathological pressure, focus on.Recovering nutrition on intervertebral disc | Only focus on eliminating pathological pressure |
| Nature of the force | Non-linear logarithmic curve | Linear |
| Power point | Focus on the pathological changes of intervertebral disc | The whole spine |
| The pattern of forces | Continuous controllable dynamic model | A simple continuous or intermittent mode |
| Angle of force | Accurate pressure reduction, force angle is precise, accuracy rate can reach to 90% | Traction is resisted, the angle is not correct |
| Transmission device | Hydraulic drive system | Simple connection of cables and pulleys |
|
Vertebral side muscle contraction resistance |
Almost do not produce | Produce |
| Receptor-force feedback system | Do have | Don't have |
| Intervertebral disc internal pressure drop | Significantly, up to -150 to -200mmHg | Not obvious, generally difficult to achieve negative pressure |
| Intervertebral disc height increase | Significantly higher | Not obvious |
| Treatment result | Make the protrusions back to intervertebral disc, restore intervertebral disc height | Trying to relieve the patient's pain, only by forcing patients braking |
| Patient comfort | Higher | Poor |
| Device type | Treatment and rehabilitation | Rehabilitation |
| Clinical research situation | More global research confirmed | Less systematic study |
Non Surgical Spinal Decompression Machine details
1. Controlling body 2. Controller 3. Base 4. Treatment angle controller
5. Head fixing device 6. Treatment bed 7.Pedals 8.Lighting equipment
FAQ
1. Are you a manufacturer of spinal decompression products?
Yes, the alien capsule spinal decompression system is developed and produced by we Feilong medical.
2. Can I get a sample before order?
We don’t provide sample for traction machine as the product value is big, you can come to our company to experience our product.
3. How can I pay and the delivery time?
T/T, L/C, Western Union… all is acceptable, the delivery time for spinal decompression machine is 30-45days after receive your payment.
4. How about the after-service?
We can provide you with online or offline installation instruction manuals and free equipment operation training courses.
5. What is the MOQ?
The spinal decompression machine is start to order from 1set.
6. What is the mode of transportation?
Usually shipped by sea, shipping port is Shanghai Port in China.
Contact Person: Amanda
Tel: 15136250979
